2024 Edition Professional 3D Printer Buyers Guide
Choosing the right 3D printer doesn't have to be difficult. Find the perfect printer for your application. This in-depth guide covers pricing, materials, dimensional accuracy, and more.
Download nowDental 3D Printers comparison
An extremely large build volume combined with ultra-fast Lubricant Sublayer Photo-curing (LSPc) technology makes the NXD 200 one of the world's fastest 3D printers at up to 60cm on the Z-axis per hour.?
Learn MoreA wide range of materials and Continuous Liquid Interface Production™ (CLIP™) technology deliver great looking parts fast at rates of up to 20cm on the Z-axis per hour.
Length x Width x Height
mm
mm
Maximum print speed measured in the z direction per hour. Faster speeds may require larger layer heights.
per minute
cm/hour
µm
µm
*Material dependent
µm
100µm*
µm
Internet connection required to operate
Starting at price per liter. *Bulk pricing specifically available when ordering 50 liters or more of select materials.
Lubricant Sublayer Photo-curing (LSPc) technology utilizes a powerful light array which is masked to accurately control the position of light shining through. Finally, a proprietary LSPc membrane, which creates a no-stick zone between the cured part and vat and allows resin to flow quickly beneath the part.
Continuous Liquid Interface Production™ (CLIP™) technology utilizes an oxygen permeable layer to create a "deadzone" at the bottom of the resin vat, enabling continuous printing without having to separate and reposition in between layers.
The Carbon M2 can only be acquired via a subscription model. At $50,000/yr and a minimum of 3 year term plus required "Accessory Pack" at $12,500, the Carbon M2 can be acquired for a minimum of $162,500. Want installation and training? Add another $10,000. And finally, printed parts need to be washed. If you opt-in for the Carbon Part Washer, add another $10,000/yr.
At around half the total cost of the M2, the NXD200's startup cost to purchase is equal the year one startup cost of the Carbon M2 subscription. Nexa along with our partnership with 3D DDS, also offer full support and three year extended warranty, zero interest financing on the Nexa, making the hardware accessible for companies of all sizes.
Learn More About Nexa3D >Resin | Print Height / Orientation | Print Orientation | Print Time | 8 hr day output** |
---|---|---|---|---|
KeyModel Ultra™ Ivory | ~ 94 mm | vertical | 1 hr 24 min | 100-200+ |
KeyModel Ultra™ Ivory | ~ 17 mm | Flat on build plate | 29 min | 200+ |
*Part Output will vary depending on nesting strategy & part size
**Assuming one Nexa 3D printer per material running all day long
Printer | @ +/- 150um | @ +/- 100um |
---|---|---|
Nexa NXD200 | 95-98% | 85-95% |
3rd party Benchmark A | 90-98% | 85-95% |
3rd party Benchmark B | 93-96% | 88-92% |
NXD200 meets and/or exceeds Model accuracy standards when compared to other large-volume printers
Printer | Full Build Volume* | Speed Per Layer* | 8-Hour Day Output** | 24-Hour Day Output** |
---|---|---|---|---|
Nexa NXD200 | 20-50+ | 8.24 sec | 125-200+ | 350-650+ |
3rd party Average Benchmarks | 8-20+ | 10.35 sec | 70-100+ | 200-300+ |
* Estimated using similar nesting strategy
** Assumption based on one printer operating with no lag time
NXD200 Produces KeyModel Ultra samples ~20% faster than leading high-volume
NXD 200 can nest ~40% more models than leading high-volume competitors
Resin | Print Height / Orientation | Print Orientation | Print Time | 8 hr day output** |
---|---|---|---|---|
KeySplint Soft® | ~ 57 mm | 45-60° vertical | 2 hr 22 min | 110+ |
*Part Output will vary depending on nesting strategy & part size
**Assuming one Nexa 3D printer per material running all day long
Assumptions | 10 splints per day | 40 splints per day |
---|---|---|
Price per 1KG of KeySplint Soft | $425 | $425 |
Time in Minutes (design, print, clean, finish) | 245 minutes | 245 minutes |
Labor Rate ($/hr) | $25/hour | $25/hour |
Grams Per Splint | 8 grams | 8 grams |
Waste Factor per bottle | 12% | 12% |
Selling Price of Splint by Lab to Doctor | $100.00 | $100.00 |
Per part labor and material cost in $ | $24.28 | $16.62 |
Lab Profit per part | $75.72 | $83.38 |
Profit per day | $757.20 | $3,335.04 |
Profit per week (5 days per week) | $3,785.98 | $16,675.19 |
Doctor Profit per year (50 weeks) | $189,299.24 | $833,759.47 |
Lab Profit per year, after true annual cost of printer (assumes $50,000) | $139,299.24 | $783,759.47 |
Printer | Full Build Volume* | Speed Per Layer* | 8-Hour Day Output** | 24-Hour Day Output** |
---|---|---|---|---|
Nexa NXD200 | 32+ parts | 15.16 sec | ~100 | ~300 |
3rd party Average Benchmarks | 20+ parts | 23.31 sec | ~50 | ~150 |
* Estimated using similar nesting strategy
** Assumption based on one printer operating with no lag time
NXD200 Produces Splint samples ~25% faster (KSS) & ~50% faster (KSH) than leading high-volume competitors
NXD 200 can nest ~60% more Splints than leading high-volume competitors
Resin | Print Height / Orientation | Print Orientation | Print Time | 8 hr day output** |
---|---|---|---|---|
KeyGuide® | ~ 59 mm | 45-60° vertical | 1 hr 52 min | 140+ |
*Part Output will vary depending on nesting strategy & part size
**Assuming one Nexa 3D printer per material running all day long
Printer | @ +/- 150um | @ +/- 100um |
---|---|---|
Nexa NXD200 | 87-93% | 75-85% |
3rd party Benchmark A | 81-95% | 63-84% |
3rd party Benchmark B | 63-83% | 48-63% |
NXD200 meets and/or exceeds Surgical Guide accuracy standards when compared to other large-volume printers
Printer | Full Build Volume* | Speed Per Layer* | 8-Hour Day Output** | 24-Hour Day Output** |
---|---|---|---|---|
Nexa NXD200 | 15+ parts | 11.39 sec | ~90 | ~260 |
3rd party Average Benchmarks | 20+ parts | 18.26 sec | ~50 | ~140 |
* Estimated using similar nesting strategy
** Assumption based on one printer operating with no lag time
NXD200 Produces KeyGuide samples 29% faster than leading high-volume competitors
NXD 200 can nest 25% more surgical guides than leading high-volume competitors
Resin | Print Height / Orientation | Print Orientation | Print Time | 8 hr day output** |
---|---|---|---|---|
KeyTray™ | ~ 72 mm | 45-60° vertical | 2 hr 3 min | 40+ |
*Part Output will vary depending on nesting strategy & part size
**Assuming one Nexa 3D printer per material running all day long
Printer | Full Build Volume* | Speed Per Layer* | 8-Hour Day Output** | 24-Hour Day Output** |
---|---|---|---|---|
Nexa NXD200 | 11+ parts | 10.25 sec | 40+ | 130+ |
3rd party Average Benchmarks | 8+ parts | 22.44 sec | 15+ | 50+ |
* Estimated using similar nesting strategy
** Assumption based on one printer operating with no lag time
NXD200 Produces KeyTray samples ~50% faster than leading high-volume competitors
NXD 200 can nest ~25% more trays than leading high-volume competitors
Get full details about the Nexa NXD200 including material sheets, benchmark prints, and more.
Get StartedDynamism Manufacturing
On Demand
Interested in trying out materials and printing methods for your dental needs? Dynamism's online 3D Stereolithography, SLS and FFF printing service is fast and easy. Get started your 3D printed samples today.
Learn MoreWe were founded in 1997. We have offices in Chicago and Denver with four showrooms across the U.S.
The leading national supplier of Desktop 3D printers. Expertise in both Industrial and Desktop 3D printing. Supplier of next-generation Metal, SLS, ultrafast Industrial printers.
2024 Edition Professional 3D Printer Buyers Guide
Choosing the right 3D printer doesn't have to be difficult. Find the perfect printer for your application. This in-depth guide covers pricing, materials, dimensional accuracy, and more.
Download now