Founded in 1997. Offices in Chicago and Denver. Four showrooms across the U.S.
The leading national supplier of Desktop 3D printers. Expertise in both Industrial and Desktop 3D printing. Supplier of next-generation Metal, SLS, ultrafast Industrial printers.
Unlimited toll-free support
UltiMaker S7 Pro Bundle
Unleash true 24/7 3D printing
The UltiMaker S7 Pro Bundle adds the Material Station to our newest S series 3D printer, transforming it into a manufacturing powerhouse. This one-of-a-kind upgrade further simplifies the 3D printing worklow with automatic switching of up to 6 spools. And constant humidity control ensures material is delivered in perfect condition for high-quality 3D prints.
S7 Pro Bundle
Anytime 3D printing means all-the-time productivity
The Material Station brings to the UltiMaker S7 high-quality 3D printed parts and models at maximum output. Its huge capacity and humidity-controlled material handling increases print success rate, print quality, and uptime to unlock 24/7 reliable production – while minimizing human error, print job time, and operator time.
3D print without supervision
Designed and tested to be left unattended, the Material Station allows the UltiMaker S7 to print longer – day or night. Whether a print job requires a different loaded material, or a spool runs out, it automatically switches.
All the uptime in the world
Loading material into the Material Station takes seconds – not minutes. Simply open the door, drop the spool into a bay, and guide it to either extruder. During a print, any spool that is not being used can be switched out.
Your production workflow. Streamlined
The Material Station means the UltIMaker S7 can handle a wider range of print jobs. NFC material recognition informs UltiMaker Digital Factory which spools are loaded and will optimally manage your job queue – minimizing downtime.
Always-fresh 3D printing materials
The Material Station on the UltiMaker S7 Pro Bundle stores material in an environment below 40% relative humidity. This keeps the filaments pristine and leads to higher print success. It's like the spool never left its packaging.
Delivering material optimal for 3D printing
Perfect humidity control
Reliable filament switching
End-of-filament detection avoid human error and increase print quality.
It's staying dry in here
Humidity, dust... The Material Station defeats them both. Just plug it in and its silica gel will extract moisture and automatically regenerate, keeping the fully enclosed chamber below 40% relative humidity – even in outside conditions of up to 70% humidity.
The end of end-of-spool anxiety
The Material Station makes running out of filament a thing of the past. Instead, you can get the most out your materials by printing right to the end of a spool. Each filament bay in the Material Station has run-out detection and will switch spools automatically.
Material handling without the headaches
The Material Station reduces the risk of human error in material handling and storage. Ejected filament always retracts with a clean, sharp tip. And moisture-sensitive filament can be safely left in the humidity-controlled chamber.
3D print with more materials, more easily
The Material Station integrates with the UltiMaker S7, Cura, and the Digital Factory. With six front-loading NFC material bays and a simple, zero-maintenance design, it's never been easier to load, insert, and print with almost any combination of polymers and abrasive composites to unlock more 3D printing applications.
Front loading for fast changeovers
With the Material Station, say goodbye to the back of the UltiMaker S7. Load and eject material from the front – even while another spool is printing. Simply place any material in any bay, insert the filament in extruder hole 1 or 2, and press the eject button to remove it.
Load third-party polymers and composites
With abrasive-resistant prefeeders in every bay, the UltiMaker S7 Pro Bundle enables loading, printing, and storage with more third-party materials – including glass and carbon fiber composites.
Low maintenance, high uptime
This is a workhorse of an accessory. The Material Station requires zero scheduled maintenance tasks. Simply unbox, connect two Bowden tubes and two cables. And triple the spool capacity of the UltiMaker S7 in minutes.
UltiMaker Personal is the software solution that's perfect for the individual user who wants to explore basic 3D printing capabilities – with remote printing via UltiMaker Digital Factory and UltiMaker 3D Printing Academy e-learning courses.
UltiMaker Essentials gives you the tools you need to start 3D printing in your organization, while meeting IT requirements. Features include remote printer management, firmware firewalls, verified plugins, and direct support. Have peace of mind with added security, stability, and productivity.
Our award-winning 3D printers are robust, reliable, and easy to use. They deliver quality parts time and again. Designed and tested to run 24/7, they allow you to achieve the results you need more quickly and easily.
Software ready for Industry 4.0
Trusted by millions of users across 14 languages, UltiMaker Cura integrates with any workflow through UltiMaker Marketplace plugins. Then scale production and digital distribution with UltiMaker Digital Factory.
Material choice like never before
UltiMaker offers the widest material choice on the market. Through our Material Alliance, choose the perfect filament for your application – from advanced polymers to carbon fiber composites.
Support dedicated to your success
Wherever you are in the world, UltiMaker support is close by. Our global network of service partners offer professional installation, training, and maintenance in your language and time zone.
Print Head: Dual extrusion print head with auto-nozzle lifting system and swappable
print cores Technology: Fused filament fabrication (FFF) Build Volume: 330 x 240 x 300 mm [13 x 9.4 x 11.8 in] Layer resolution:
0.25 mm nozzle: 150 - 60 micron
0.4 mm nozzle: 200 - 20 micron
0.6 mm nozzle: 300 - 20 micron
0.8 mm nozzle: 600 - 20 micron XYZ resolution: 6.9, 6.9, 2.5 micron Build Speed: < 24 mm3/s Build plate: PEI coated flexible build plate (20 - 140 °C) Air Manager: PA filter - Independently tested according to UL2904 (Standard Method for
Testing and Assessing Particle and Chemical Emissions from 3D Printers) with
UltiMaker materials and corresponding Cura print profiles. Nozzle diameter: 0.4 mm (included)
0.25 mm, 0.6 mm, 0.8 mm (sold separately) Operating sound: < 50 dBA
UltiMaker Personal (for individuals – includes UltiMaker Cura) UltiMaker
Essentials (for organizations – includes UltiMaker Cura Enterprise) Find our
full range of enterprise plans at ultimaker.com/software Supported OS: